top of page
Search
Custom Wheel

Do's & Don'ts of Curb Damage Repair

Curb damage is referred to as damage inflicted to the wheels or rims of your car when it hits the curbs, potholes, or some other type of obstacle. Without a doubt, it also results in the form of light cosmetic damage. This damage might be in the form of scratches, scuff marks, or deterioration in the finishing of the wheel or rim. Meanwhile, curb damages might cause severe problems like structural damages that include bending of wheels, chunking, extreme gouging, and cracking. However, curb damage repair can be done, and injuries can be eliminated. Before we discuss how to repair the curb damage, let us go through the significant dangers caused by the curb rash damage:

  • Structural damage caused by the curb rash can lead to the breaking apart of the wheel.

  • Unexpected blowouts can occur when the injury affects the sidewall of tires.

  • Front or rear suspension damages are inevitable if curb damages are not repaired in time.

  • The alignment of the wheels might get disturbed.

  • Vulnerable lines like cooling and brake lines can be affected with long-term loss.


curb damage repair

How to Carry Out Curb Damage Repair?


How to perform curb damage repair? That is a common question that comes to mind when your car hits a curb or pothole. If the damage is leftover there, the consequences can be even dire. Consequently, it is necessary to get the curb damage repaired as soon as possible.


Suppose you have everything that is required to fix the curb damage. In that case, you may undoubtedly do the curb damage repair with the help of videos, let's say YouTube videos. But depending upon the extent of damage caused by the curb, you will need few essentials: scouring pads, spray paints, putty, sandpaper, and a clean coat to wear. In case of cracks on the rim, you also need paint that matches the rim's color to eliminate the crashes.

On the other hand, if the damage to the wheel or rim is severe, it might be harder for you to repair it independently without the help of a professional.


Repairing of Minor Curb Damages


But still, here we tell you how you can repair minor curb damages. So, the following is a standard procedure to get the minor curb damage repair done:


1. Protective Gear

Before you start repairing the damage caused by the curb, it is essential to wear protective gear to avoid exposure to harmful chemicals. It may include gloves, a mask, and an overall coat.

2. Cleaning of Damaged Area

The damaged area must be cleaned thoroughly before repairing it. There is a wide range of solutions that can be used for cleaning, such as Ammonia solution, Borax, Nitrites, etc.

3. Masking

Masking is the process of providing sensitive parts with a protective layer. Different components like valve stem, lug nuts, and other exposed parts are masked to prevent exposure to chemicals to curb damage repair.


4. Elimination of Scuff Marks and Scratches

For alleviating the scratches, scuff marks, and other defects, coarse sandpaper is used to sand out the imperfections. Sanding out these defects is necessary before applying putty to the damages.

5. Application of Putty

After using the sandpaper, it now turns to apply automotive putty to the damaged areas of the wheel or rim. After applying the putty, it must be allowed to dry for at least 30 minutes.

6. Scuffing of Damaged Area

Once the applied putty is dry, using a scuff pad is necessary to scuff around the area. The process remains to continue unless the area is smooth entirely.

7. Spraying a Primer

Here and now, it is time to spray the primer on the whole wheel. Before spraying, the primer should be shaken well and poured about 6 inches from the rim. Likewise, before applying the second coat, the first one should be allowed to dry. At the same time, the back-and-forth motion of the spray is recommended to cover the whole area.

8. Paint on the Wheel

Having sprayed the wheel, it comes to paint the wheel with the same color as before. For this purpose, multi-coats of the paint should be done. Before the next coat, the previously coated surface should be dry. After the color is done, let it dry for the whole night.

So, we discussed the complete procedure to do the minor curb damage repair. The process might take 6 to 24 hours, depending on the approach you adopt to get the problem fixed. Nevertheless, to have a new look at your wheel, a sandblasting gun, air hose, and air compressor are recommended. Otherwise, your wheels may not offer the appearances to meet your expectations.


Hiring a Professional to Do Curb Damage Repair


It is always good to get a wheel repaired by an expert. If you are not successful in getting a fully restored wheel from curb damage, consulting with an expert service provider is the only choice. They possess tremendous experience, knowledge, and advanced equipment, which are usually not available to a non-professional person.

Moreover, consulting a professional person for repairing wheels might cost you less than the expense of solving the problem on your own. In the USA, most repairing professionals demand from $50 to $150 to repair a wheel. But then again, it depends upon the intensity of the damage. Here we want to bring one thing to your notice if the repairing of cracked or gouged wheel is required, the costs might range from $200 to $500.


How Can We Help You?


We secure the position of a leading service provider in the field of curb damage wheel repairing. Our services regarding curb damage repair encompass all minor as well as technical faults of your wheel. Whether you have alloy wheels, gloss blackening wheels, or shiny alloy steel wheels, the wheels would serve and shine like a new one after having our service.

Call us today to schedule an appointment and get the paint job of your dreams today (818) 764-7679.

1,345 views0 comments

Recent Posts

See All

Comments


bottom of page